Programming the SmartVest Generator

Operating Your SmartVest Generator

The SmartVest SQL Air Pulse Generator features a memory function that saves your individual treatment protocols.

This allows most young children to use the device with minimal parental oversight, and requires less supervision to complete each treatment correctly.

Electromed has also designed the generator so that you can operate it in a horizontal position or in an upright position. Both orientations allow you the same view of the display.

At the center of the generator is the control panel. The panel consists of selection buttons and a display screen. All treatment sessions begin at the home display.

From home, you can select an operating mode: manual, ramp, info, or programs one through three.

The buttons running along the length of the display are the start/pause button, set button, and return to home button:

  • The start/pause button is a dual-function button that starts the generator when it is not pulsing and pauses or stops the device when it is pulsing.
  • The set button is used to save the treatment protocols.
  • The home button is used to return to the home screen.

For more detailed instructions, see the SmartVest SQL and SQL-W Airway Clearance System Manual.

Setting Up Your SmartVest Generator

Plug your generator into an electrical outlet with the cord supplied with this system.

The generator can be switched on and off. The power indicator light is visible when the generator is powered on.

Connect one end of the hose to the generator. Twist slightly to tighten the connection. Attach the other end of the hose to the air inlet on your vest. Again, twist slightly to tighten the connection.

If you have questions about the use of your SmartVest Airway Clearance System or its service needs, our Product Support team is available seven days a week to answer your questions.